Rp address meaning

What is Rp in an address?

Configures a device interface as a rendezvous point (RP).

What is RP address in multicast?

The single tree-based multicast system uses a Rendezvous Point (RP) based message dissemination scheme. That is, a sender of the multicast group sends a message to the root or the RP node of the tree, which then forwards the message along the tree to all receivers.

What does RP mean in Cisco?

Route Processor Overview

The route processor (RP) card is the system controller for the Cisco CRS 4-slot line card chassis. It performs route processing and distributes forwarding tables to the MSCs. Although the routing system contains two RP cards, only one RP is active at a time.

What does IP PIM RP address do?

An RP acts as the meeting place for sources and receivers of multicast data. In a PIM-SM network, sources must send their traffic to the RP. This traffic is then forwarded to receivers down a shared distribution tree.

What RP stand for?

RP stands for "roleplay" (which may also be spelled "role play" or "role-play"). This acronym is most often used by those playing RPGs, but may be used by anyone who is engaging in a bit of make-believe.

What does RP stand for in RP?

2. Short for role-playing, RP describes the act of someone taking on the persona of a character in a book, show, comic book, or, more commonly, a video game.

What is RP mapping?

RP mapping agents store the information that is embedded in the RP announcements in a cache inside a group-to-RP mapping. The RP mapping agents join a multicast group 224.0. 1.39, where they receive the RP announcements. RP MAs send advertisements to a popular multicast group known as Cisco-RP-Discovery (224.0. 1.40).

What is multicast auto-RP?

The auto-RP mechanism is one way that a multicast router can learn the set of group-to-RP mappings. Auto-RP automatically distributes mapping information to routing devices. It simplifies use of multiple RPs for different multicast group ranges, thus allowing multiple RPs to act as backups for each other.

How does multicast select RP?

The mapping agent listens to the RP announcement packets from our RP candidates and makes a list of all possible RPs. It will then elect an RP and informs the rest of the network with RP mapping packets that are sent to multicast address 224.0. 1.40.

What is RP in Internet?

Role-playing (RP) is a wonderful way to connect with your pals online while having some fun and being creative.

What does RP stand for in engineering?

Rapid prototyping (RP) is the fabrication of prototype parts directly from a computer solid model without the need for an expensive tool or die set.

What does RP stand for in Cyber Security?

Responsible Person show sources. NIST SP 800-81-2.

What is a PIM domain?

Protocol-Independent Multicast (PIM) is a family of multicast routing protocols for Internet Protocol (IP) networks that provide one-to-many and many-to-many distribution of data over a LAN, WAN or the Internet.

What is RP in PIM sparse mode?

PIM Sparse Mode uses a special router called a Rendezvous Point (RP) to connect the flow source or multicast tree to the router next to the wannabe receiver. The RP is typically used only temporarily, as we'll see below. There can be different RP's for different multicast groups, which is one way to spread the load.

What is PIM in firewall?

Protocol Independent Multicast (PIM) is a protocol for efficiently routing IP packets to multicast groups that may span throughout the internet. PIM provides dynamic multicast support on the appliance.

What does RP stand for in building?

Real Property (RP means buildings, improvements to buildings, utility distribution systems, prefabricated structures, and fixed equipment required for the operation of a building which is permanently attached to and a part of the building and cannot be removed without cutting into the walls, ceilings, or floors.

What does RP mean police dispatch?

RP,R/P. - REPORTING PARTY - OR - RESPONSIBLE PARTY.

What is the abbreviation for an address?

There are a few common abbreviations of address: addr., add., and adr.

What does RP mean on a receipt?

RP Payment means any Restricted Payment or other transaction made subject to satisfaction of the RP Payment Conditions or any component thereof. Sample 1Sample 2Sample 3. Save. Copy.

What does RP mean in deed?

If you have title to a permanently affixed mobile home and the land on which it is located, Florida Law requires that you declare your molbile home as real property. You must apply at the Property Appraiser's Office for a Real Property (RP) sticker. The sticker is then purchased at Tax Collector's Office.

What is RP in project management?

The rate of performance (RP) is the ratio of actual work completed to the percentage of work planned to have been completed at any given time during the life of the project or activity.

What does RP mean in crime?

RP: Reporting person, the one notifying the police of an incident. Run code: Drive to a location using the patrol car's emergency lights and siren.

What is RP in military?

Religious Program Specialist: Religious Program Specialists provide support to Navy Chaplains in developing programs to meet the needs of Navy, Marine Corps, and Coast Guard personnel and their families. RPs perform functions that do not require ordination nor pastoral counseling.

How do you abbreviate street address?

Different streets have different abbreviations: for example Streets are “St.”, avenues are “Ave.”, roads are “Rd.”, a boulevard is “blvd” and a lane is “Ln.”

What are the 6 different forms of address?

A term of address may be friendly (dude, sweetheart), unfriendly (You idiot!), neutral (Jerry, Marge), respectful (Your honor), disrespectful (buddy, said with sarcasm), or comradely (My friends).