Altium show board dimensions

How do I see board dimensions in Altium?

The General tab of the PCB Information dialog displays the number of primitives on the board, board dimensions, as well as other information such as the number of DRC violations and Pad holes.

What is the PCB dimension in Altium?

Altium Designer opens with a default PCB size of 6-inches by 4-inches in a rectangular board outline (when you create a new PCB object).

How do I add dimensions to PCB Altium?

Click the button on the Place Dimension drop-down ( ) of the Utilities toolbar. Right-click in the design space then choose the Place » Dimension » Linear command from the context menu.

What is the dimension of PCB?

The most common standard panel sizes are 18” × 24”, 18” × 12”, 9” × 24”, and 9” × 12”. A ½” clearance around the panel border is required for handling panels, although some manufacturers will extend this required clearance out to 1” for multilayer boards.

What is PCB panel size?

How big is a board panel? The standard sizes for PCB panels in inches are 24 x 18, 12 x 18, 24 x 9, and 12 x 9. A perimeter clearance of half an inch (for double-sided boards) and 1 inch (for single-sided boards) is generally given.

How do you define board layout in Altium?

Set the View mode to 2D Layout Mode (View menu). Select the objects (the Edit » Select » All on Layer command is ideal for this). Run the Design » Board Shape » Define from selected objects command - the board shape will be redefined to the selected objects and the display updated.

How do I change the sheet size in Altium schematic?

Open up the schematic file by double clicking it in the left side pane. Then click on Panels in the bottom right corner and select Properties. Change the Sheet Size to A4, and double check to make sure both Visible and Snap Grid are enabled and set to 100mil.

How do I change the grid size PCB in Altium?

By default, Altium Designer has preconfigured snap grids with 1mm, 2.5mm and 5mm grid spacing, which can be switched in any editor by pressing the G hotkey button at any time.

How do you add dimensions to a plan?

Room dimensions are presented in width by the length. For example, a room that has a dimension of 12' x 16' means it's 12 feet wide (from side to side) by 16 feet long (from top to bottom).

How do you add dimensions in 2d design?

Click Dimensions in the drawings menu. Select a dimensioning tool. Select the items that need to be dimensioned. After you finish adding dimensions, select Done.

What is panelize PCB?

PCB panelization is a manufacturing technique in which smaller boards are manufactured en-masse connected together as a single array, making it easier to move through an assembly line. The individual boards can easily be depanelized or removed from the array for packaging or installation into a product.

How do I open the Properties panel in Altium?

The Properties panel is available in all editors and can be accessed in the following ways: Click the Panels button at the bottom right of the design workspace, then click Properties. Choosing View » Panels » Properties from the main menus. Double-click on an object in the workspace.

Where is PCB board wizard in Altium?

This command is accessed from the PCB Library Editor by: Choosing the Tools » Footprint Wizard command from the main menus.

What is the dimension of PCB?

What are the dimensions of a circuit maker board?

Some features of the printed circuit boards: 20mm x 80mm (6x28 holes) or 30mm x 70mm (10x24 holes) Black and sleek design.

How do you measure PCB?

In most PCB software, the size of a line can be determined simply by left-clicking on the line. The size of the line appears in a bar above the layout. Multiply the sizes of a horizontal and vertical line of the box together to get the size of the board.

What are the dimensions of PCB in mm?

Today, it is more accurate to say there is a range of common or standard PCB thicknesses. These include 0.031in (0.78mm ), 0.062in (1.57mm) and 0.093in (2.36mm). Depending on your choice for PCB fabrication and assembly services, you may be able to have boards made with other thicknesses.

What is trace width?

Trace width is a vital parameter in PCB design and layout. It is necessary for carrying currents through printed circuit boards while keeping trace temperature increases below a specific input value to prevent overheating.

How do you trace a circuit board?

Use the free multimeter's probe to touch a single spot on the board. Then using your finger with the foil move it over the components touching the soldered parts. Thus you will cover more area quicker and when you hear the multimeter beeping - you have found your track on the PCB.

How do you define a board shape in Circuitmaker?

The board shape can also be defined from selected objects. Typically this will be a set of lines and/or arcs placed on a mechanical layer. Once all the objects are selected, select the Define from selected objects command. The board shape will update to follow the path defined by the selected lines.

How do you define a board cutout in Altium?

A board cutout can be placed anywhere in the Board Shape. To place a cutout, switch to view the board in 2D Layout Mode then use the Design » Board Shape » Define Board Cutout command from the main menus (alternatively, you can also use the Place » Define Board Cutout command in Board Planning Mode).

How do you choose a size in PCB?

Standard PCB via size

Vias from drills start from 0.15mm with a 0.3mm solder pad and can drill as big as requested, but different sizes may require manual drilling, which increases the production cost. Holes smaller than 0.15mm can only be drilled by laser drill.