Asustor control center cannot find nas

1. How do I find my Asustor NAS?
2. How do I use Asustor control center?
3. What is the default port for Asustor NAS?
4. Why is my NAS not showing on my network?
5. How do I view NAS in File Explorer?
6. Is Asustor owned by ASUS?
7. Is Asustor a good NAS?
8. How do I reset my Asustor NAS?
9. Why does NAS have 2 ports?
10. Is Synology better than Asustor?
11. Why can't I see my mapped network drives?
12. Why can't I see my NAS on the network Windows 11?
13. How do I find my NAS external IP address?
14. How do I access my NAS from an external network?
15. Do you need a static IP for NAS?
16. Can I connect my NAS directly to my computer?

How do I find my Asustor NAS?

Quickly find and configure your NAS

You only need to install and run ASUSTOR Control Center, and it will list all the ASUSTOR devices on your network, allowing you to easily connect to them.

How do I use Asustor control center?

Double-click on it to start Control Center. When you open Control Center, it will immediately begin to scan your local area network for ASUSTOR NAS devices. Under the status field of the interface, you will be able to see if the individual system is ready, uninitialized, or if its firmware needs to be upgraded.

What is the default port for Asustor NAS?

Default ports are 8000 and 8001 respectively.

Why is my NAS not showing on my network?

Make sure that the LED indicators of the connected LAN ports on your Synology NAS are flashing properly. Make sure that the LED indicators of your switch or router are flashing properly. Run a PING command to check the connectivity between Synology NAS and your computer.

How do I view NAS in File Explorer?

Press Windows + R to open a Run dialog box, and type “\\＜NAS address=”” ip=””＞“ to view your NAS in Windows 10 File Explorer. Map NAS shared folders as network drives on your Windows system.

Is Asustor owned by ASUS?

Founded in 2011, ASUSTOR Inc. was established via direct investment from ASUSTeK Computer Inc. The ASUSTOR brand name was created as a portmanteau of “ASUS” and “Storage”.

Is Asustor a good NAS?

ASUSTOR NAS devices provide both performance and quality and the powerful Intel CPU is especially suitable for video playback or transcoding on Plex Media Server.

How do I reset my Asustor NAS?

ASUSTOR provides a reset button recessed into a pinhole behind each and every NAS device sold. Insert a thin object, such as a paperclip extended into the hole and press the button for approximately five seconds to reset the administrator password(default password is admin), once its...

Why does NAS have 2 ports?

It is designed to increase bandwidth when multiple clients are simultaneously accessing the same system. If you connected both ports to your network, you could lose one of the physical connections or even an entire switch, and still have access to your NAS.

Is Synology better than Asustor?

For most people, however, the Synology DiskStation DS220+ is the best choice overall. If it's not quite what you're looking for, the ASUSTOR NIMBUSTOR 4 (AS5304T) is an excellent second choice.

Why can't I see my mapped network drives?

Method 2.

Firstly, you should open the "File Explorer" on your computer and then go to the "View" section. In front of the "Hidden Items," there is a box that you should check to complete the step. Once this is done, you will realize that all the hidden folders and files will show on the mapped network drive.

Why can't I see my NAS on the network Windows 11?

Check that your computer network connection is set to Private Network instead of Public and also make sure you have enabled File & Printer sharing.

How do I find my NAS external IP address?

To find the IP address of your Synology NAS, open the Synology Assistant app and wait for it to scan your network for available Synology devices. Once the scan is complete, the IP address of all the available Synology devices on your network will be displayed as marked in the screenshot below.

How do I access my NAS from an external network?

You can use QuickConnect to access your Synology NAS from a web browser session. With the QuickConnect URL, displayed in the QuickConnect setup, found in External Access > QuickConnect, you can access your NAS from anywhere.

Do you need a static IP for NAS?

A static IP address is needed if you will be making the appliance accessible from the internet. By default the NAS device will get an IP address from your networks DHCP server, this address can change which would make accessing from the internet impossible.

Can I connect my NAS directly to my computer?

If you want to connect your NAS directly, you can do it. Set up manual IP on your PC and NAS with a one in the same IP range. Than use Synology finder app or type IP in the address bar and it's done. Maximum speed for regular network cable is 1Gb/s which is around 115MB/s in real life.