Bigfix relay requirements

1. What is the requirement for BigFix relay?
2. What can BigFix relay be used for?
3. What is BigFix relay server?
4. At what point do you need a relay?
5. What are the 3 main parts of a relay?
6. What is the purpose of relay server?
7. Why relay is used in microcontroller?
8. What database is required while installing BigFix server on Windows?
9. How do I deploy a BigFix agent?
10. Which is the hardware requirement for installing server?
11. What database is required while installing BigFix server on Windows?
12. How many endpoints BigFix relay version 9.5 10 or higher supports?
13. How much RAM is enough for server?
14. How many GB of RAM does a server need?
15. How much RAM do you need to run a server?

What is the requirement for BigFix relay?

The BigFix relay must have a two-way TCP connection to its parent (which can be a server or another relay). The Fixlet to install the relay requires at least Internet Explorer 5.0 or later versions to work correctly. For BigFix Version 9.5 Patch 19 and later, this requirement is no longer needed.

What can BigFix relay be used for?

BigFix Relays enable BigFix Clients to pass status messages to the BigFix Server including action results, retrieved properties, and relevant Fixlet messages. BigFix Relays enable BigFix Clients to register their last known IP address so they can be "pinged" later if there is new information to gather.

What is BigFix relay server?

Relays improve performance by: Relieving downstream traffic. Using relays, the BigFix server does not need to distribute files, such as patches or software packages, and Fixlets to every Client. Instead, the file is sent once to the relay, which in turn distributes it to the clients.

At what point do you need a relay?

One of the most common situations that require the use of a relay occurs when an application needs to switch from high to low current (or vice versa) within the same circuit. For example, the temperature sensors that power HVAC units require levels of amperage that vastly exceed the capacity of their wiring.

What are the 3 main parts of a relay?

A relay contains a coil, an armature, and at least one pair of contacts. Current flows through the coil, which functions as an electromagnet and generates a magnetic field. This pulls the armature, which is often shaped as a pivoting bracket that closes (or opens) the contacts.

What is the purpose of relay server?

Typically refers to a small server that runs within an End-Customer's DMZ in order to securely tunnel internet connections from within the firewalled environment out to the internet for a specific application or service.

Why relay is used in microcontroller?

Because relays are the link between the low power digital electronics and high power devices. It allows digital circuits and digital microcontrollers to high power devices on and off. Simply, it is used to on/off power circuits using microcontrollers.

What database is required while installing BigFix server on Windows?

The BigFix platform installed on Windows requires MS SQL Server as a database.

How do I deploy a BigFix agent?

From the BigFix console, click Wizards > All Wizards > Client Deploy Tool Wizard. The Client Deploy Tool Wizard will guide you through the deployment of the BigFix clients. You can also launch the same wizard from the Unmanaged Assets view of the console by performing these steps: Select one or more assets in the view.

Which is the hardware requirement for installing server?

Windows Server 2022 Standard and Datacenter editions share the same hardware requirements. Both require a 1.4 GHz, 64-bit CPU and 512 MB of RAM; for the Desktop Experience GUI-based version, the system needs 2 GB of RAM. Additionally, 32 GB of disk space are required.

What database is required while installing BigFix server on Windows?

The BigFix platform installed on Windows requires MS SQL Server as a database.

How many endpoints BigFix relay version 9.5 10 or higher supports?

BigFix leaf relays for the Windows and Linux platforms can be configured now to manage up to 5000 endpoints.

How much RAM is enough for server?

The starting point for different projects can vary anywhere from 8 GB to 64 GB of server RAM, based on the project needs.

How many GB of RAM does a server need?

In terms of size, for high-end workstations 16GB minimum is probably best, whereas for more budget friendly home set ups, 8GB should about do. Looking at servers, 16GB and 32GB are common capacities of server memory, although they can support up to 6TB for 2933 MT/s DDR4.

How much RAM do you need to run a server?

As data size grows, memory doesn't always grow. For servers with a 10-59GB database, RAM size is 74% of the data (27GB database needs 20GB RAM). For 60-224GB database, RAM size is 23% (210GB data needs 48GB RAM). For 225-600GB database, RAM size is 13% (example: 488GB data, 64GB RAM).