Creating Persistent Volume In Tails From USB

1. Why do you need 2 USB for Tails?
2. How to boot Tails from USB on Windows 10?
3. How can persistent volumes be provisioned?
4. Can you encrypt a Tails USB?
5. How big of a USB do you need for Tails?
6. What kind of USB do I need for Tails?
7. Is Tails still secure?
8. How many times can you daisy chain USB?
9. Can Tails access hard drive?
10. Does Tails work with secure boot?
11. Can you use Tails without VPN?
12. Can you use Tails on personal computer?
13. What is the difference between persistent volume and persistent volume claim?
14. Where are persistent volumes stored?
15. What is required for PersistentVolumes and PersistentVolumeClaims to be created on demand in Kubernetes?
16. Can pods share PVC?

Why do you need 2 USB for Tails?

You can also use two USBs to install and run Tails. Using two USBs is to use the Tail installer for incremental updates and create a secure encrypted persistent storage. You can use just one USB drive if you do not need encrypted storage. For this, you need two USB drives of at least 4GB of storage each.

How to boot Tails from USB on Windows 10?

In the Use a device screen, choose Boot Menu. Windows shuts down, the computer restarts, and a Boot Menu appears. Plug in your Tails USB stick shortly after choosing Boot Menu and while Windows is shutting down. In the future, we We recommend that you only plug in your Tails USB stick while Windows is shutting down.

How can persistent volumes be provisioned?

A PersistentVolume (PV) is a piece of storage in the cluster that has been provisioned by an administrator or dynamically provisioned using Storage Classes. It is a resource in the cluster just like a node is a cluster resource.

Can you encrypt a Tails USB?

Tails - Persistent Storage. If you start Tails from a USB stick, you can create an encrypted Persistent Storage in the free space left on the USB stick. The files and settings stored in the Persistent Storage are saved encrypted and remain available across different working sessions.

How big of a USB do you need for Tails?

Hardware requirements: A USB stick of 8 GB minimum or a recordable DVD. All the data on this USB stick or DVD will be lost when installing Tails.

What kind of USB do I need for Tails?

System requirements: PC Computer (any brand) with USB 2.0 / 3.0 port which can boot with USB drive.

Is Tails still secure?

Reducing risks when using untrusted computers

Tails can safely run on a computer that has a virus. But Tails cannot always protect you when: Installing from an infected computer. Running Tails on a computer with a compromised BIOS, firmware, or hardware.

How many times can you daisy chain USB?

The USB specification is limited to a maximum of 7 tiers. Therefore, for there is a hard limit of 5 daisy-chained hubs (not counting the root hub). Most host systems have just one USB controller that is integrated in the host system chipset. Here, you can see a diagram of a typical PC architecture.

Can Tails access hard drive?

To access internal hard disks: When starting Tails, set up an administration password. Open the Files browser. Click on the hard disk of your choice in the left pane.

Does Tails work with secure boot?

Tails, an OS recommended by Edward Snowden, is now capable of booting on systems where UEFI Secure Boot is enabled.

Can you use Tails without VPN?

The Tails organization doesn't recommend using VPNs as a replacement for Tor, as their goals are incompatible. However, certain use cases might warrant using a VPN with Tails for even greater benefits.

Can you use Tails on personal computer?

Tails stands for The Amnesic Incognito Live System, which is a reference to how your activities are gone for good as soon as you unplug the USB drive from the computer it's attached to and move on. It's based on the Debian Linux distribution, and it should work just fine with most computers from the last decade or so.

What is the difference between persistent volume and persistent volume claim?

A persistent volume (PV) is a piece of storage in the Kubernetes cluster, while a persistent volume claim (PVC) is a request for storage. There are two ways to use persistent storage in Kubernetes: Use an existing persistent volume. Dynamically provision new persistent volumes.

Where are persistent volumes stored?

A persistent volume is a piece of storage in a cluster that an administrator has provisioned. It is a resource in the cluster, just as a node is a cluster resource.

What is required for PersistentVolumes and PersistentVolumeClaims to be created on demand in Kubernetes?

You must first create a PersistentVolume object in Kubernetes. Once the PersistentVolume has been created, you must create a PersistentVolumeClaim in order for you to claim that volume for the pod. Once you have your PersistentVolume and PersistentVolumeClaim, you are now ready to create the pod.

Can pods share PVC?

So is there any way to access that PV within a pod which is in namespace 'ns2'. A PVC is a namespaced resource, Pods on different namespaces can't share the same PVC. Pods on different namespaces would need to use two different PVC resources.