How to test a 8 pin relay with multimeter

1. How do you check if a relay is good with a multimeter?
2. How do you check if a relay is OK?
3. How many Ohms should a relay have?

How do you check if a relay is good with a multimeter?

Take the leads of the multimeter and connect them across the coil terminals of the relay. For a normal coil, the multimeter should read anywhere between 40Ω to 120Ω. If the coil is damaged i.e., it is open, the meter shows out of range and you have to replace the relay.

How do you check if a relay is OK?

The only tool required to check a relay is a multimeter. With the relay removed from the fuse box, the multimeter set to measure DC voltage and the switch in the cab activated, first check to see if there are 12 volts at the 85 position in the fuse box where the relay plugs in (or wherever the relay is located).

How many Ohms should a relay have?

The relays are usually supplied with 12 V directly from the vehicle battery. The electrical resistance (impedance) of the coil is vary and is different depending upon the manufacturer of the relay as well as relay's type, but in general a typical value should be expected between 50 ohms and 200 ohms.