Hue bridge died

Why is my hue bridge not working?

If the 3rd or Internet light on your hue bridge is flashing, first try unplugging the power from your bridge and router for 30 seconds and reconnect them. If it still does not come back, try moving the bridge to another ethernet port on your router and wait for about 5 minutes for everything to come back up.

How do I restore my hue bridge?

2 Philips Hue Bridge: Factory Reset

Turn the Bridge up-side down. Using a pointed tool, press and hold the reset button for 5 seconds. The LED on the front will blink to show that the reset is in progress. Once the LED stops blinking, the reset is done and you can proceed to set up the device again.

Why is my hue bridge first light not on?

1 - First light means your bridge is getting power. If this light isn't on, make sure your bridge power adapter is plugged in. 3 - The third light means that your Philips Hue has internet connectivity. As the one above it must be fixed meaning it has the internet connection.

Does hue bridge need batteries?

So I wanted to write this guide to talk through everything you need to know about this useful Hue accessory. The Philips Hue motion sensor takes two batteries (AAA for indoor and AA for outdoor), and it has a “minimal battery lifetime” of 2 years.

How long is hue warranty?

Philips warrants that this device will be free from defects in material and workmanship and will operate for 2 years based on up to 3 hours average working time per day/7 days per week, when used as directed.

How do I reset hue sync bridge?

- Reset the Sync Box. ( factory-reset of the Hue Sync box (the method with the front button only resets the Wi-Fi credentials): remove power, hold button, connect power while holding button, and wait for x seconds to issue a full-factory-reset.) >>

How do I reconnect my Philips Hue?

You can reconnect your Tap in the Philips Hue app: "Settings" > "My Devices" > "+ Connect new devices".

Why is Philips discontinuing hue?

The news was first reported on HueBlog.de and confirmed to The Verge by Hrank. “After discussions with our suppliers, it came to light that there wasn't a feasible solution to the aesthetic inconsistency of the Philips Hue Lightguide bulbs discovered during consumer tests,” she said.

Can you change Philips Hue without bridge?

However, the Hue Bridge is not required to use Philips Hue smart lighting. Most Philips Hue smart lights are Bluetooth-enabled (look for the symbol on the packaging) and can be controlled with the Philips Hue Bluetooth app without a Hue Bridge — but a Bluetooth setup does come with some limitations.

Can Hue lights burn out?

With an average lifespan of 25,000 hours, a Philips Hue light bulb will not need replacing anywhere near as often. Exactly how often you will need to change a Hue light bulb depends on how many hours a day it is used — but it can last up to 25 years.

Do Hue lights ever burn out?

Philips Hue bulbs, like any other form of light bulb, will eventually burn out, but they're rated by the manufacturer to last 25,000 to 50,000 hours when operated under ideal conditions.

Can someone hack my hue lights?

Attention Philips Hue device owners: You need to update the Philips Hue Bridge's software, because hackers could exploit Philips Hue smart light bulbs to get into your home network via the bridge.

How do I activate my hue bridge?

Plug in your bridge and it will automatically power up. Connect it to your Wi-Fi router using the network cable provided. Wait for the three lights to come on and you are good to go.

How do I reset hue sync bridge?

Can you use hue remote without bridge?

Control Philips Hue via bridge or Bluetooth? You can control Philips Hue lights with a bridge via WiFi, or via Bluetooth without a bridge. Every Hue light works both ways, except for the outdoor lighting.

How do I force hue Bridge to update?

Update your Hue system with the Philips Hue app

Open the app, go to settings and click "Software-update". The app will now start to look for updates and download them when available.

Do Philips Hue bulbs burn out?

Can I use Alexa instead of Hue Bridge?

Through the Alexa app, you can also group your Hue bulbs together and even group them with smart lights of a different brand. However, without the Hue Bridge, you can't create custom scenes, have lights turn on or off based on your location, or access various other advanced features available in the Hue app.

Can you use Hue without Wi-Fi?

To answer the above question, yes, the Hue Switch and Smart Button are designed to work without the internet. This is because they also communicate using ZigBee, directly to the Hue Bridge, meaning that there's no direct internet interaction needed.

How do I reset Hue lights without bridge?

To do that, make sure your lights are turned on. Now open the Hue BT App, go to Settings, select Lights, select your bulb of choice. It'll open a screen with your Hue light model details and firmware version. Scroll down until you see the Reset button.