Ipv6 dhcp relay destination packet tracer

1. What is IPv6 DHCP relay destination?
2. Should I enable IPv6 on my route?
3. Should I enable DHCP IPv6?
4. Where is DHCP relay setup?
5. Where does DHCP relay agent should be installed?
6. How do I add a DHCP relay?
7. Is DHCPv6 the same as IPv6?
8. How to configure DHCP IPv6 stateful?
9. How do I manually assign IPv6 addresses?
10. Does IPv6 work in Packet Tracer?
11. What is a DHCP relay address?
12. What is DHCP relay port?
13. Should I enable DHCP relay?
14. When would you use DHCP relay?
15. How do I find my DHCP relay?
16. Where is DHCP relay configured?
17. Is DHCP relay TCP or UDP?
18. Why are there 2 ports for DHCP?
19. What is DHCP l2 relay?

What is IPv6 DHCP relay destination?

Enables the IPv6 DHCP relay agent function and specifies the IPv6 address as a destination address to which the client messages are forwarded.

Should I enable IPv6 on my route?

When possible, it is better to keep both IPv4 and IPv6 addresses enabled. For example, using only IPv6 can cause some accessibility issues, as only about one third of the internet supports IPv6 addresses. Likewise, disabling IPv6 can cause certain problems, especially if your router is already using an IPv6 address.

Should I enable DHCP IPv6?

If you're running a dual-stack environment, with both IPv4 and IPv6, then it probably makes sense to use DHCP and DHCPv6. This gives you the most consistency and control over your environment.

Where is DHCP relay setup?

To configure DHCP relay, from Policy Manager: Select Network > Configuration. The Network Configuration dialog box appears.

Where does DHCP relay agent should be installed?

You install the DHCP Relay Agent, like other Windows NT services, from the Services pages of the Control Panel Network dialog. To install it, right-click the Network Neighborhood icon on your desktop to display the context-sensitive menu and choose Properties to display the Network dialog.

How do I add a DHCP relay?

Enable DHCP relay on the routing switch (the default setting.) Ensure that a DHCP server is servicing the routing switch. Enable IP routing on the routing switch. Ensure that there is a route from the DHCP server to the routing switch and back.

Is DHCPv6 the same as IPv6?

It is the IPv6 equivalent of the Dynamic Host Configuration Protocol for IPv4. IPv6 hosts may automatically generate IP addresses internally using stateless address autoconfiguration (SLAAC), or they may be assigned configuration data with DHCPv6.

How to configure DHCP IPv6 stateful?

Configuring a Cisco router as a Stateful DHCPv6 server

The configuration is pretty basic and straightforward. We must create a new DHCP pool using the command ipv6 dhcp pool [pool-name]. This will lead us into the pool configuration mode, where we specify all parameters such as prefix, DNS servers, and a domain name.

How do I manually assign IPv6 addresses?

In Settings go to Network & Internet and click the Properties button for the interface you wish to configure. Click the Edit button under IP settings, change the configuration type to Manual, enable IPv6, and populate your settings.

Does IPv6 work in Packet Tracer?

Packet Tracer supports a wide array of IPv6 features. We'll start by learning how to assign IP addresses to different devices and how to configure routing between them. Finally, we'll create a setup that enables IPv6 communication over IPv4 devices.

What is a DHCP relay address?

DHCP is a client server protocol that automatically provides IP hosts with IP addresses and other related configuration information. A DHCP relay (agent) is a host that forwards DHCP packets between clients and servers that are not on the same physical subnet.

What is DHCP relay port?

The DHCP Relay service allows to pass DHCP broadcast messages to network segments a client computer is not directly attached to. DHCP relaying can be used to share a single DHCP server across logical network segments that are separated by a firewall.

Should I enable DHCP relay?

A DHCP relay simply forwards the DHCP requests to the DHCP server. It is needed when the DHCP server is not in the same subnet as the hosts needing a DHCP address.

When would you use DHCP relay?

A DHCP relay agent is a host or router that forwards DHCP packets between clients and servers. Network administrators can use the DHCP Relay service of the SD-WAN appliances to relay requests and replies between local DHCP Clients and a remote DHCP Server.

How do I find my DHCP relay?

Viewing the DHCP relay setting

Use the show config command (or show running for the running-config file) to display the current DHCP relay setting. NOTE: The DHCP relay and hop count increment settings appear in the show config command output only if the non-default values are configured.

Where is DHCP relay configured?

We configure a DHCP relay agent only on the interface that is directly connected to a local subnet. In this network, four interfaces are directly connected to the local subnets. These interfaces are the following.

Is DHCP relay TCP or UDP?

The DHCP employs a connectionless service model, using the User Datagram Protocol (UDP).

Why are there 2 ports for DHCP?

The reason TWO reserved ports are used, is to avoid 'waking up' and scheduling the BOOTP server daemons, when a bootreply must be broadcast to a client. Since the server and other hosts won't be listening on the 'BOOTP client' port, any such incoming broadcasts will be filtered out at the kernel level.

What is DHCP l2 relay?

DHCP relay agents eliminate the need to have a DHCP server on each physical network. Relay agents populate the giaddr field and also append the Relay Agent Information option to the DHCP messages. DHCP servers use this option for IP addresses and other parameter assignment policies.