Netatmo relay flashing white

1. Why is my Netatmo app not working?
2. How do I reset my Netatmo Relay?
3. Why is my Netatmo app not connecting to Relay?
4. Does Netatmo work without Wi-Fi?
5. How do I restore my Wi-Fi connection?
6. How do I update Netatmo firmware?
7. What is the Relay on Netatmo?
8. Is Netatmo made in China?
9. How do I reset my Netatmo outdoor module?
10. Why is my camera not connecting to WiFi?
11. Why is my camera not connecting to the internet?

Why is my Netatmo app not working?

Restart your Internet-Box. Close the Home app completely, then re-open it. Open the Netatmo app and check whether the devices are now paired with it. Unplug the Netatmo device for at least two seconds, then reconnect it.

How do I reset my Netatmo Relay?

To reset: Plug the Relay into a 230V socket using the mains adapter or boiler adapter. The LED should blink five times then go out. Press and hold the Relay button for 20 seconds.

Why is my Netatmo app not connecting to Relay?

If the Netatmo app displays "Relay unavailable", the Relay may not be correctly plugged into the power supply or the internet connection may be unstable or down. In most cases, you can restore the connection by following a few simple steps: Unplug your Wi-Fi router from the power supply.

Does Netatmo work without Wi-Fi?

If you are cut off from the Internet, your connected products will still work locally, as well as battery powered products. However, you will not be able to control your installation via the Home + Control App or change the settings.

How do I restore my Wi-Fi connection?

Unplug the router and modem's power cords from the power outlet for 15 seconds. Plug the power cords back in. Check that all cords and cables are secure at both ends. Wait a few minutes, until the lights on the modem and router are working right.

How do I update Netatmo firmware?

The internal software (firmware) on Netatmo products is updated automatically. The products are therefore equipped with the latest features and optimisations without requiring any intervention on your part.

What is the Relay on Netatmo?

The Netatmo relay provides Wi-Fi connection to the internet and remote control from an app.

Is Netatmo made in China?

Netatmo is a French company which manufactures smart home devices.

How do I reset my Netatmo outdoor module?

Press and hold the top of the Station until it flashes red. Press once to confirm. The Station will then turn solid red. It will restart and flash blue.

Why is my camera not connecting to WiFi?

Make sure to check that all connections, cables, and power is intact and tightly connected. If your security cameras are wireless, check the internet and make sure that it is connected successfully to the WiFi. You can also check if the router is properly working.

Why is my camera not connecting to the internet?

Check the several reasons why your security cameras working over network (IP cameras) are not working on WiFi. The antennas of the WiFi IP camera are not fixed well – the antennas are loose. Your wireless IP camera does not have power supply. You enter the wrong login password.