Torgeek
- What is allowed IPS in WireGuard?
- Does all traffic go through WireGuard?
- Does WireGuard need public IP?
- What is the default gateway for WireGuard client?
What is allowed IPS in WireGuard?
If it needs changing, don't forget to also change the IP for the WireGuard interface on the gateway server. The AllowedIPs value is 0.0. 0.0/0 , which means “all IPv4 addresses”.
Does all traffic go through WireGuard?
Route the entire Internet traffic through the WireGuard tunnel. Routing your entire Internet traffic is optional, however, it can be advantageous in cases where you are expecting eavesdropping on the network. This may not only happen in insecure open Wi-Fi networks (airports, hotels, trains, etc.)
Does WireGuard need public IP?
The Peer – or server – configuration requires the server's public key, which is added here. The Endpoint is where you tell WireGuard where to find the server. Nothing will work without this one! That would require the server's public IP – or it's domain name – followed by the port you've chosen.
What is the default gateway for WireGuard client?
Wireguard will always use the default gateway #6140.
