Torgeek
- How do I reset my Xbmcmart box?
- Why is my android box not connecting to Wi-Fi?
- How do I reboot my smart box?
- Why is my digital box not working?
- How do I get my Android box to work?
- How do I know if my TV fuse is blown?
- How do I get my TV box to work?
- Why won't my TV turn on but has power?
- Where is the Reset button on my cable box?
- How do you force reset an android?
- Why is my IPTV box not loading?
- Can IPTV be blocked?
- Why is my TV box not connecting to the Internet?
How do I reset my Xbmcmart box?
How do I reset my device? - Press SETUP on your remote and go to Other > More Settings > Backup and Reset > Factory Data Reset > Reset > Erase.
Why is my android box not connecting to Wi-Fi?
If Wi-Fi isn't working on any connected devices, your router is the main culprit and not the Android TV. You can turn off the router, remove all wired connections, and switch it on after 60 seconds. Also, check for any pending firmware updates for your router.
How do I reboot my smart box?
Press and hold the POWER button until a menu appears → select Restart. Press and hold the POWER button until Power off appears on the screen.
Why is my digital box not working?
Check the power source
If the digital box is plugged into a power outlet: Ensure it's a working power outlet by testing with other electronics. Try plugging the digital box power cord into another outlet. Unplug the digital box power cord from the outlet and plug it back in.
How do I get my Android box to work?
An android smart TV box works in a very simple manner. All you need to do is connect the box into the back of your regular TV using a HDMI port. You need to set the TV for the correct HDMI input. Just after connecting, choose HDMI 1 or HDMI 2 option depending on the port you have plugged the cable in.
How do I know if my TV fuse is blown?
Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
How do I get my TV box to work?
Most all Android TV boxes use an HDMI video interface to play video and sound to a TV. Connecting the HDMI cable to a TV, powering up the box, and having the TV set to the correct HDMI input is all that is required.
Why won't my TV turn on but has power?
Try unplugging the TV from the electrical outlet. While its unplugged, hold down the power button on the TV itself for about 30 seconds. Once that time is up, release the button and plug it back into power. Power the unit back up and see if you can see any imagery.
Where is the Reset button on my cable box?
Check along the front side of your cable box for a small circular button labeled Reset. If you don't see the button on the front side of your cable box, then check on the back panel near the power cords. If you can't find a Reset button on your cable box, then it may reset by holding down the Power button instead.
How do you force reset an android?
Hold down the power button for 15 to 30 seconds, until the phone restarts.
Why is my IPTV box not loading?
Your IPTV may freeze or loop due to the connection to a server at the other end. Perhaps your server is currently experiencing a spike in traffic or loads. There is a good chance that everyone uses the same IPTV provider if they are experiencing buffering and freezing on a particular channel.
Can IPTV be blocked?
Once your IPTV device (MAG Box, Zgemma, FireTV etc) is connected correctly to the VPN Router (WiFi or Ethernet Cable) then the device will be behind an encrypted VPN connection and cannot be logged, throttled or blocked by any ISP.
Why is my TV box not connecting to the Internet?
If the Wi-Fi® signal on your TV device drops or intermittently disconnects, try a power restart or reset of your TV and your modem/router first. A power cycle or reset of your devices often resolved these issues. Then if needed, check your network connection status and the troubleshooting steps provided.
